Business

Resultado fuera de especificación

A 90-minute, 4-round basic Express simulation for Spanish vocational training (Formacion Profesional), Quimica family: module 1388 Control de calidad de productos farmaceuticos, biotecnologicos y afines of the grado superior title Tecnico Superior en Fabricacion de Productos Farmaceuticos, Biotecnologicos y Afines

4 rounds Undergraduate English, Español

Preview

About this simulation

A 90-minute, 4-round basic Express simulation for Spanish vocational training (Formacion Profesional), Quimica family: module 1388 Control de calidad de productos farmaceuticos, biotecnologicos y afines of the grado superior title Tecnico Superior en Fabricacion de Productos Farmaceuticos, Biotecnologicos y Afines (Real Decreto 832/2014). English title: OOS Investigation.

The learner is a newly qualified analyst in the quality-control laboratory of a fictional generics plant of an invented inland Spanish town, who handles an out-of-specification HPLC assay result and what follows it over four months (September to December 2027).

Eight decisions over four moments: what is done with the OOS result of a batch and which phase-Ia laboratory check is run; the scope of the investigation and the batch while it is open, with production pressing for a Friday shipment; a second OOS with an assignable laboratory cause and a failed system suitability with six batches waiting; and the CAPA and the trending of OOS, OOT and invalidated results.

Scored on the non-conforming batches released to the market (shown by origin: the first batch, later batches with the cause uncorrected, unreliable laboratory results, other), the cost of quality, the days to the release decision and a data-integrity index of the records; one tempting choice hides its consequence until the quality-assurance review of the file shows it (preparing the sample again until it passes), and two critical errors (a peak re-integrated by hand to pass, the batch released with the investigation open) cap the card of their round.

Lesson: repeating until it passes is not investigating.

Training level only: stylised decision practice that complements the 90 hours of module 1388 and supervised practice in a quality-control laboratory, and does not replace them; the figures are a stylised teaching model, not plant statistics, and no real batch decision can be taken from them; the quality unit and the qualified person release batches, never the technician; the product, its limits and the laboratory practice used are general knowledge that needs subject-expert review.

Spanish primary, English parity. All companies, brands, places and people are fictional.

What participants learn

After the session, participants will be able to:

  • Analyze an OOS result as a signal to investigate: keep the preparations and the data, tell the supervisor and check the laboratory with no preconceived cause, rather than preparing again until it passes or averaging it away
  • Apply a phase-Ia laboratory check of the raw data, the audit trail, the integration, the system suitability, the standards and the calculations, without ever re-processing data to make it pass
  • Apply a production investigation of the other batches of the window when no laboratory cause is found, and keep the batch in quarantine until the quality unit decides
  • Evaluate whether a result may be invalidated, only on a documented assignable cause, and stop a sequence whose system suitability fails
  • Evaluate a CAPA by whether it corrects the root cause, and trend OOS, OOT and invalidated results

Prerequisites

  • What an HPLC assay, a specification and a result as a percentage of the declared content are
  • What a batch record, a PNT, the system suitability and the quality unit are

Who it is for

An introductory simulation that assumes no prior knowledge of the subject, designed for undergraduate courses. It also works in vocational and high-school programmes and in onboarding sessions.

How a session runs

  1. The instructor creates a session from the Eureka dashboard and invites the participants.
  2. Participants play 4 rounds. In each one they submit their decisions and the simulation calculates the results. The first round opens with: lunes 6 de septiembre de 2027, 09:15: el primer resultado fuera de especificación.
  3. The simulation can be run in English, Español.
  4. The instructor follows each participant's progress and results from the dashboard, and uses the class results for the debrief.

Decisions participants make

The decisions participants make during the simulation:

  • El 93,1 % del lote 7124
  • La comprobación de laboratorio de la fase Ia
  • El alcance de la investigación
  • El lote 7124 mientras la investigación sigue abierta
  • El segundo OOS: el lote 7151 al 94,4 %, con el patrón pasado de su fecha de reanálisis
  • La idoneidad del sistema falla (cola 2,3; límite 2,0) con seis lotes esperando
  • La CAPA de la investigación de septiembre
  • La tendencia de los resultados OOS y OOT

Ready to use Resultado fuera de especificación with your students?

Contact us and we'll set you up with a free trial session.

Contact us